The Clipacore assembly is manufactured from high tensile alloy steel for increased strength and excellent wear resistance. You can be safe in the knowledge that our build quality will meet your exacting technical requirements. Furthermore, the unique Clipacore system is designed and manufactured in Great Britain.
We want to share with you our performance tests.
Double shear tests exceeding well over 250 N/m torque (core drills typically 60-80 N/m torque).
Milling tests exceeding well over two hundred 7.3N concrete blocks.
Clipacore Chuckaway removes the common problems associated with chuck headed core drills:
Chuckaway can also be used with the Chuckaway extension bar to penetrate deeper walls.
ALWAYS REFER TO THE MANUFACTURERS INSTRUCTIONS FOR SOINDLE THREAD SIZE AND BEFORE REMOVING THE CHUCK! ENSURE DRILL IS FULLY DISCONNECTED FROM THE POWER SUPLY.
Clipacore is a unique Core Bit quick release system, invented and patented by former heating engineer Ty Harnet. Clipacoreshop had the pleasure of working closely with Ty in promoting and supplying Clipacore products to engineers in many different trade settings from boiler installations, general plumbing and bathroom installations, ventilation and air conditioning installations, upgrades and any situation that requires a hole larger than 32mm to be drilled through a wall. The Clipacore quick release system allows for a much safer and quicker decoupling of the core bit from the core drill, thus reducing the amount of time taken, the effort required to decouple and reducing the likelihood of sustaining a painful injury in the process. Clipacoreshop has now added to our stock holding by investing in new and exciting Clipacore products such as Clipacore Chuckaway, Clipacore Fluemate, and Clipacore Condensmate. All three of these products have the potential of being game changers in the building and maintenance industries. Clipacore Chuckaway, as the name suggests, means that you can literally do away with the chuck on your core drill by fitting the Clipacore Chuckaway accessory, banishing the prospect of suffering from a missing chuck key or jammed or loose chucks causing major issues forever! Using Clipacore Condensmate means that when enlarging existing condense drain away outlets due to the upgrade requirements of new regulations, this task is now made a lot easier by using Clipacore Condensmate. Clipacore Fluemate is worthy of particular note, as it does away with the need to use a hammer and chisel to remove and or enlarge an existing boiler flue when changing the boiler. By removing the boiler flue cowl and inner tube, the Clipacore Fluemate guide can be slid into the existing flue and by taking advantage of the Clipacore Duocut accessory, the core bit is able to be guided accurately onto the exact point required on the wall, drilling out the old sand and cement/expanding foam that was holding the old flue in place, or for enlarging existing holes. Simple but effective! Clipacore Fluemate can also be used to enlarge the hole to 152mm to facilitate the use of a Flue Snug. Clipacore and Clipacoreshop, a great combination for all of your Clipacore system requirements.